WT32-SC01 Plus ~
The SC01 Plus uses an ESP32-S3-WROVER module with a 3.5-inch capacitive touch display. openHASP can take advantage of the 320x480 resolution to show a large custom user-interface. On the back there are some ports with GPIOs so you can expand the capabilities as needed.
|480x320 8-bit Display
|Flashing the initial bootloader
|2 MB PSram
|Serial Flashing tool recommended
|JST 1.25mm Expansion headers
|IPS Viewing angles
The development board is powered via USB Type-C.
A 3D-printable case can be found on: https://www.printables.com/model/381026-wt32-sc01-plus-desk-case#preview