Skip to content

Styling Properties~

You can adjust the appearance of objects by changing the foreground, background and/or border color of each object. Some objects allow for more complex styling, effectively changing the appearance of their sub-components.

Suffixes~

The styling properties below support an optional two-digit suffix to indicate which part and/or state of the object the property applies to. A styling property without suffix will be applied to the default state of the main part of the object (i.e. the background).

Very detailed styling can be applied to each part depending on the state of the object:

Parts~

All objects have at least a main part. Several objects are made up of additional parts which can each be styled separately. To access the properties of the parts use a two-digit suffix appended to the styling properties below.

The part indexes are:

  • 00 = main part of the object (i.e. the background)
  • 10 = the indicator or needle, highlighting the the current value
  • 20 = the knob which can be used the change the value
  • 30 = the background of the items/buttons
  • 40 = the items/buttons
  • 50 = the selected item
  • 60 = major ticks of the gauge object
  • 70 = the text cursor
  • 80 = the scrollbar
  • 90 = other special part, not listed above

Tip

For example the gauge object uses line_width to set the minor ticks thickness, line_width60 for major ticks and line_width10 for the thickness of the needle.

States~

The state indexes:

  • 00 = default styling
  • 01 = styling for toggled state
  • 02 = styling for pressed, not toggled state
  • 03 = styling for pressed and toggled state
  • 04 = styling for disabled not toggled state
  • 05 = styling for disabled and toggled state

For example to set the radius of all the buttons in btnmatrix you'd set a value for the property radius30. Using radius without a suffix will apply the property to the outline background of it.

A toggle btn can be made to show text yellow when toggled ON with "text_color":"white","text_color01":"yellow"

Inheritance~

If objects are children of other objects (they have the parentid property set), property inheritance takes place.

Some properties (typically that are related to text and opacity) can be inherited from the parent object's styles. Inheritance is applied only if the given property is not set in the initial jsonl of the child object (at first draw). In this case, if the property is inheritable, the property's value will be searched in the parents too until an object specifies a value for the property. The parents will use their own state to detemine the value. So for example if a button is pressed, and the text color comes from here, the pressed text color will be used. (source) Inheritance takes place at run time too.

When a parent object is deleted, all children will be deleted too.

General~

General styling options.

Property Value Default Description
radius uint16 depends
on theme
The radius of the rounded corners of the object:
0 = no radius i.e. square corners
65535 = pill shaped object (true circle if object has same width and height)
clip_corner bool false Enable to clip off the overflowed content on the rounded (radius > 0) corners of the object

Background~

The color and gradient used for drawing the background of an object.

Property Type Description
bg_opa uint8 The background opacity level
bg_color color The background color
bg_grad_color color The background gradient color
bg_grad_dir [0..2] 0 = none (=default)
1 = horizontal
2 = vertical
bg_grad_stop uint8 Specifies where the gradient should stop.
0 = at left/top most position
128 = in the center
255 = at right/bottom most position (=default)
bg_main_stop uint8 Specifies where should the gradient start
0 = at left/top most position (=default)
128 = in the center
255 = at right/bottom most position

To adjust the background style of a page use pXb0 where X is the page number.

Border~

The border is drawn on top of the background. It has radius rounding.

Property Type Description
border_color color Specifies the color of the border
border_opa uint8 Specifies opacity of the border
border_width uint8 Set the width of the border
border_side uint8 Specifies which sides of the border to draw.
0 = none
1 = bottom
2 = top
4 = left
8 = right
15 = full
A sum of these values is also possible to select specific sides.
border_post bool If true the border will be drawn after all children have been drawn.

Outline~

The outline is similar to border but is drawn outside of the object.

Property Type Description
outline_color color Specifies the color of the outline
outline_opa uint8 Specifies opacity of the outline
outline_width uint8 Set the width of the outline
outline_pad int16 The space between the object and the outline. (default=0)

Padding and Margin~

Padding sets the space on the inner sides of the edges. It means "I don't want my children too close to my sides, so keep this space". Padding inner sets the "gap" between the children. Margin sets the space on the outer side of the edges. It means "I want this space around me".

Objects use them to set spacing. See the documentation of the objects for the details.

Property Type Description
pad_top int16 Set the padding on the top
pad_bottom int16 Set the padding on the bottom
pad_left int16 Set the padding on the left
pad_right int16 Set the padding on the right
pad_inner int16 Set the padding inside the object between children
margin_top int16 Set the margin on the top
margin_bottom int16 Set the margin on the bottom
margin_left int16 Set the margin on the left
margin_right int16 Set the margin on the right

Shadow~

The shadow is a blurred area under the object.

Property Type Description
shadow_color color Color of the shadow
shadow_opa uint8 Specifies opacity of the shadow
shadow_width int16 Set the width (blur size) of the outline
shadow_ofs_x int16 Set the an X offset for the shadow
shadow_ofs_y int16 Set the an Y offset for the shadow
shadow_spread uint8 Make the shadow larger than the background in every direction by this value

Text~

Properties applied to the textual elements of the objects.

Property Type Description
text_color color Color of the text
text_opa uint8 Opacity level of the text [0-255]
text_font uint8 The Font ID
text_letter_space int16 Distance between letters of the text, can be a negative number
text_line_space int16 Distance between lines of the text, can be a negative number
text_decor uint8 Add text decoration.
0 = none (=default)
1 = underline
2 = strikethrough
3 = underline and strikethrough
text_sel_color color Set background color of text selection

Value~

Value is an arbitrary text label drawn on top of an object. It can be a lightweight replacement for creating standalone label objects.

Property Type Description
value_str string Text to display
value_color color Color of the text
value_opa uint8 Opacity level of the text [0-255]
value_font uint8 The Font ID
value_letter_space int16 Distance between letters of the text, can be negative
value_line_space int16 Distance between lines of the text, can be negative
value_align align Alignment of the text. Can be:
none
left
right
top
bottom
full
center (=default)
value_ofs_x int16 X offset from the default position of the alignment
value_ofs_y int16 Y offset from the default position of the alignment

Line~

Properties for line, line meter objects.

Property Type Description
line_color color Color of the line
line_opa uint8 Opacity level of the line [0-255]
line_width int16 Width of a scale line in the active region (also see scale_end_line_width below), or gauge minor ticks thickness
line_rounded bool true = draw rounded line endings. Default = false
line_dash_width int16 Width of dash. Dashing is drawn only for horizontal or vertical lines. 0 = disable dash (= default)
line_dash_gap int16 Gap between two dash line. Dashing is drawn only for horizontal or vertical lines. 0 = disable dash (= default)

Scale~

The properties for styling the scale of line meter, gauge objects.

Property Type Description
scale_grad_color color Gradient to this color on the scale lines, or gauge minor ticks
scale_end_color color Color of the scale lines in the end region, or gauge minor ticks / critical area
scale_width int16 Width of the scale in the normal region, or length of gauge minor ticks
scale_border_width int16 Width of a border drawn on the outer side of the scale in the normal region
scale_end_line_width int16 Width of a scale line in the end region
scale_end_border_width int16 Width of a border drawn on the outer side of the scale in the end region

Image~

Property Type Description
image_opa uint8 Opacity of the image
image_recolor color Color of the overlay color mask
image_recolor_opa uint8 Specifies opacity of the overlay color mask