- ESP32 DevKitC (38pin)
- ILI9488 TFT SPI 4-WIRE
- XPT2046 resistive touch controller
This board is created for the FreeTouchDeck project and the PCB-combiner board is open source. Due to the extensive documentation it was easy to port openHASP to the FreeTouchDeck.
|480x320 Display||4 MB flash|
|Build Instructions||Resistive touch|
This is a kit so you need to assemble the parts yourself. Some soldering skills are required. You can 3D print a custom enclosure.
3D Printed Cases~
You can find a 3D printable case on Thingiverse and Github.
The FreeTouchDeck can easily be flashed over USB like any ESP32 development board.
These pins can be used freely as GPIOs:
The PCB Combiner is fully Open Source Hardware:
- PCB layout
Specify the LCD Configuration to use and define the GPIOs in the environment build flags:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
Last update: 2023-03-09